| 1 |
Dr. Prashant Verma |
Effect of roughness parameters on performance of solar air heater having artificial wavy roughness using CFD”, |
2022 |
“Effect of roughness parameters on performance of solar air heater having artificial wavy roughness using CFD”, Renewable Energy (Elsevier), Volume 184, 2022, Pages 266-279, https://doi.org/10.1016/j.renene.2021.11.088. |
| 2 |
Dr. Prashant Verma |
An experimental and numerical study on phase change material melting rate enhancement for a horizontal semi-circular shell and tube thermal energy storage system |
2022 |
“An experimental and numerical study on phase change material melting rate enhancement for a horizontal semi-circular shell and tube thermal energy storage system”, Journal of Energy Storage, (Elsevier), Volume 45, 2022, 103734, https://doi.org/10.1016/j.est.2021.103734. |
| 3 |
Dr Prakash Chandra Gope |
See list |
2021 |
https://scholar.google.com/citations?user=8crAQvYAAAAJ&hl=en |
| 4 |
Dr. Prashant Verma |
Potential techniques for thermal performance enhancement for solar water heaters |
2021 |
“Potential techniques for thermal performance enhancement for solar water heaters” Nova Science Publishers, Solar Water Heating: Fundamentals and Applications |
| 5 |
Dr. VIJAY KUMAR GUPTA |
Experimental investigation on cyclic variability in diesel engine fueled with ternary blends of diesel , methanol and 1-pentanol |
2021 |
Vishnoi PK, Gautam PS, Gupta VK. Experimental investigation on cyclic variability in diesel engine fueled with ternary blends of diesel , methanol and 1-pentanol. Int J Eng Res Appl 2021;11:14–21. https://doi.org/10.9790/9622-1102041421. |
| 6 |
Neeraj Bisht |
Design and Fabrication of an Arduino based Automatic Waste Segregator |
2020 |
Neeraj Bisht, Puneet Kakkar, Design and Fabrication of an Arduino based Automatic Waste Segregator, Vol 6, No 3 (2019) |
| 7 |
Dr Prashant Verma |
R.Kumar and Prashant Verma. An experimental and numerical study on effect of longitudinal finned tube eccentric configuration on melting behaviour of lauric acid in a horizontal tube-in-shell storage unitâ€. International Journal of Energy Storage (Elsevier) 30; (2020), 101396 |
2020 |
R.Kumar and Prashant Verma. An experimental and numerical study on effect of longitudinal finned tube eccentric configuration on melting behaviour of lauric acid in a horizontal tube-in-shell storage unitâ€. International Journal of Energy Storage (Elsevier) 30; (2020), 101396 |
| 8 |
Neeraj Bisht |
Effects of Secondary Parallel Cracks on the Fracture Parameters in a Rectangular Plate Under Static Loading |
2020 |
Ansari G.A., Bisht N. (2020) Effects of Secondary Parallel Cracks on the Fracture Parameters in a Rectangular Plate Under Static Loading. In: Singh I., Bajpai P., Panwar K. (eds) Advances in Materials Engineering and Manufacturing Processes. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4331-9_11 |
| 9 |
Neeraj Bisht |
Wear Characteristics of Silica-Reinforced Rice Husk-Epoxy Hybrid Bio-composite |
2020 |
Bisht N., Gope P.C. (2020) Wear Characteristics of Silica-Reinforced Rice Husk-Epoxy Hybrid Bio-composite. In: Singh I., Bajpai P., Panwar K. (eds) Advances in Materials Engineering and Manufacturing Processes. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4331-9_5 |
| 10 |
Dr V K Singh |
Please go to the URL |
2020 |
https://scholar.google.com/citations?hl=en&user=ERyNNVMAAAAJ |
| 11 |
Dr Sakshi Chauhan |
Functionalized Graphite–Reinforced Cross-Linked Poly (vinyl Alcohol) Nanocomposites for Vibration Isolator Application: Morphology, Mechanical, and Thermal Assessment |
2020 |
K. Singh, N. Jain, A. Verma, V. Singh, and S. Chauhan, "Functionalized Graphite–Reinforced Cross-Linked Poly(vinyl Alcohol) Nanocomposites for Vibration Isolator Application: Morphology, Mechanical, and Thermal Assessment," Materials Performance and Characterization 9, no. 1 (2020): 215-230. https://doi.org/10.1520/MPC20190254 |
| 12 |
Dr Sakshi Chauhan |
Creep and dynamic mechanical behavior of cross-linked polyvinyl alcohol reinforced with cotton fiber laminate composites |
2019 |
Jain, N., Ali, S., Singh, V. K., Singh, K., Bisht, N., & Chauhan, S. (2019). Creep and dynamic mechanical behavior of cross-linked polyvinyl alcohol reinforced with cotton fiber laminate composites, Journal of Polymer Engineering, 39(4), 326-335. doi: https://doi.org/10.1515/polyeng-2018-0286 |
| 13 |
Dr. Susheel Singh Bhandari |
S. S. Bhandari, G. Gupta, P. Upreti, M. Negi, Performance Comparison of Different Phase Change Materials For Solar Cooking During off Sun Sunshine Hours, ICTEA: International Conference on Thermal Engineering, paper No. 94, 22-27 Feb., 2019 |
2019 |
S. S. Bhandari, G. Gupta, P. Upreti, M. Negi, Performance Comparison of Different Phase Change Materials For Solar Cooking During off Sun Sunshine Hours, ICTEA: International Conference on Thermal Engineering, paper No. 94, 22-27 Feb., 2019 |
| 14 |
Dr. VIJAY KUMAR GUPTA |
Experimental Analysis of CI engine Fuelled with Calophyllum Inophyllum Biodiesel and Diesel with Ethanol as an Additive |
2019 |
Gautam, P. S., & Gupta, V. K. Experimental Analysis of CI Engine Fuelled with Calophyllum Inophyllum Biodiesel and Diesel with Ethanol as an Additive. |
| 15 |
Dr L Varshney |
An Assessment of Fuel from Disposed Plastic Containers for Diesel Engine |
2019 |
Gupta, A. D., Ashish Gupta, and L. Varshney. "An Assessment of Fuel from Disposed Plastic Containers for Diesel Engine." Natural Resource Management (2019). |
| 16 |
Neeraj Bisht |
Wear Characteristics of Untreated and Alkali-Treated Rice Husk–Epoxy Bio-composite |
2019 |
Bisht N., Gope P.C. (2019) Wear Characteristics of Untreated and Alkali-Treated Rice Husk–Epoxy Bio-composite. In: Singh I., Bajpai P., Panwar K. (eds) Trends in Materials Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-9016-6_4 |
| 17 |
Dr Sakshi Chauhan |
Review on effect of chemical, thermal, additive treatment on mechanical properties of basalt fiber and their composites |
2018 |
Jain, N., Singh, V., & Chauhan, S. (2017). Review on effect of chemical, thermal, additive treatment on mechanical properties of basalt fiber and their composites, Journal of the Mechanical Behavior of Materials, 26(5-6), 205-211. doi: https://doi.org/10.1515/jmbm-2017-0026 |
| 18 |
Dr Sakshi Chauhan |
A review on mechanical and water absorption properties of polyvinyl alcohol based composites/films |
2018 |
Jain, N., Singh, V., & Chauhan, S. (2017). A review on mechanical and water absorption properties of polyvinyl alcohol based composites/films, Journal of the Mechanical Behavior of Materials, 26(5-6), 213-222. doi: https://doi.org/10.1515/jmbm-2017-0027 |
| 19 |
Dr Sakshi Chauhan |
Dynamic and creep analysis of polyvinyl alcohol based films blended with starch and protein |
2018 |
Jain, N., Singh, V. K., & Chauhan, S. (2019). Dynamic and creep analysis of polyvinyl alcohol based films blended with starch and protein, Journal of Polymer Engineering, 39(1), 35-47. doi: https://doi.org/10.1515/polyeng-2018-0032 |
| 20 |
Dr Sakshi Chauhan |
Irradiation-Induced Compositional Effects on Human Bone After Extracorporeal Therapy for Bone Sarcoma |
2018 |
Chauhan, S., Khan, S.A. & Prasad, A. Irradiation-Induced Compositional Effects on Human Bone After Extracorporeal Therapy for Bone Sarcoma. Calcif Tissue Int 103, 175–188 (2018). https://doi.org/10.1007/s00223-018-0408-2 |
| 21 |
Dr Sakshi Chauhan |
Fabrication and characterization of chitosan coated human hair reinforced phytagel modified soy protein-based green composite |
2018 |
Deepmala, Km , Jain, N., Singh, V., & Chauhan, S. (2018). Fabrication and characterization of chitosan coated human hair reinforced phytagel modified soy protein-based green composite, Journal of the Mechanical Behavior of Materials, 27(1-2), 20180007. doi: https://doi.org/10.1515/jmbm-2018-0007 |
| 22 |
Neeraj Bisht |
Effect of Alkali Treatment on Mechanical Properties of Rice Husk Flour Reinforced Epoxy |
2018 |
Neeraj Bisht, P C Gope, Effect of Alkali Treatment on Mechanical Properties of Rice Husk Flour Reinforced Epoxy, Materials Today Proccedings, Volume 5, Issue 11, Part 3, 2018, Pages 24330-24338. |
| 23 |
Sonika Chauhan |
Fracture Behavior of Welded Aluminum Alloy at High Strain Rates |
2017 |
Ravinder Singh, Sonika Chauhan, P.C.Gope, Fracture Behavior of Welded Aluminum Alloy at High Strain Rates, Procedia Engineering, 2017, 173: 1246-1250. |
| 24 |
Anil Kumar Pratihar |
Heat transfer study in freezing of peas for cold preservation |
2017 |
24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS Pilani, Hyderabad, India |
| 25 |
Dr L Varshney |
Heat Transfer and Pressure Drop Characteristics in a packed bed Solar Air Heater |
2017 |
Varshney, L., and Rameshwar Kumar Singh. "Heat Transfer and Pressure Drop Characteristics in a packed bed Solar Air Heater." International Journal of Mechanical Engineering 2 (2017). |
| 26 |
Dr. Susheel Singh Bhandari |
S. S. Bhandari, Effect of sodium pyrophosphate and polyethylene oxide on thermal diffusivity of Laponite RD suspension, Fluid Mechanics and Fluid Power Contemporary Research. pp. 215-227, (2017) |
2017 |
S. S. Bhandari, Effect of sodium pyrophosphate and polyethylene oxide on thermal diffusivity of Laponite RD suspension, Fluid Mechanics and Fluid Power Contemporary Research. pp. 215-227, (2017) |
| 27 |
Rakesh Saxena |
Effect of self-weight on topological optimization of static loading structures |
2017 |
Effect of self-weight on topological optimization of static loading structures Alexandria Engineering Journal2 February 2017... Naman Jain, Rakesh Saxena |
| 28 |
Sandeep Gupta |
Improving The Oxidation Stability Of Biodiesels Using Binary Biodiesel Blends |
2017 |
Journal of Energy Research and Environmental Technology (JERET) p-ISSN: 2394-1561; e-ISSN: 2394-157X; Volume 4, Issue 1; January-March, 2017, pp. 123-127 |
| 29 |
Dr Sakshi Chauhan |
Biomechanical investigation of the effect of extracorporeal irradiation on resected human bone |
2017 |
S. Chauhan, k. Manoj, S. Rastogi, S.A. Khan, A. Prasad, Biomechanical investigation of the effect of extracorporeal irradiation on resected human bone, Journal of the Mechanical Behavior of Biomedical Materials, Volume 65, 2017, Pages 791-800, ISSN 1751-6161, https://doi.org/10.1016/j.jmbbm.2016.09.032. |
| 30 |
Dr L Varshney |
Performance prediction for solar air heater having rectangular sectioned tapered rib roughness using CFD |
2017 |
Gupta, A. D., and L. Varshney. "Performance prediction for solar air heater having rectangular sectioned tapered rib roughness using CFD." Thermal Science and Engineering Progress 4 (2017): 122-132. |
| 31 |
Anil Kumar Pratihar |
Heat transfer and pressure drop characteristics in a duct with roughened absorber plate having rectangular transverse rib using ANSYS |
2016 |
Int. J. of Scientific & Engg. Research, Vol. 7, Issue 12, pp. 252-258, December, 2016, ISSN 2229-5518. |
| 32 |
Sonika Chauhan |
Influence of notch radius and strain rate on the mechanical properties and fracture behavior of TIG-welded 6061 aluminum alloy |
2016 |
Ravinder Singh, Sonika Chauhan, P.C.Gope, Influence of notch radius and strain rate on the mechanical properties and fracture behavior of TIG-welded 6061 aluminum alloy, Archives of Civil and Mechanical Engineering, 2016, 16(3): 513-523. |
| 33 |
Anil Kumar Pratihar |
A review on artificially roughened solar air heaters |
2016 |
Int. J. of Scientific & Engg. Research, Vol. 7, Issue 12, pp. 193-198, December, 2016, ISSN: 2229-5518. |
| 34 |
Sonika Chauhan |
Determination of Fatigue Properties Using Miniaturized Specimens |
2016 |
Sonika Chauhan, J. Chattopadhyay, B.K.Dutta, Determination of Fatigue Properties Using Miniaturized Specimens, Transactions of Indian Institute of Metals, 2016, 69(2): 609-615. |
| 35 |
Sonika Chauhan |
Limit Load Equations for Miniature Single Edge Notched Tensile Specimens |
2016 |
Sonika Chauhan, J. Chattopadhyay, B.K.Dutta, Limit Load Equations for Miniature Single Edge Notched Tensile Specimens, Transactions of Indian Institute of Metals, 2016, 69(2): 641-646. |
| 36 |
Sonika Chauhan |
Statistical Analysis of the Effect of Notches and Strain Rate on the Tensile Properties of Welded 6061 Aluminum Alloy |
2016 |
Sonika Chauhan, Ravinder Singh, P.C.Gope, Statistical Analysis of the Effect of Notches and Strain Rate on the Tensile Properties of Welded 6061 Aluminum Alloy, Transactions of Indian Institute of Metals, 2016, 69(10): 1959-1967. |
| 37 |
Anil Kumar Pratihar |
Simulation of isothermal ice slurry flow in horizontal pipe |
2016 |
6th International Fluid Mechanics and fluid Power, Dec. 15-17, 2016, MNNITA, Allahabad, U.P., India. |
| 38 |
Anil Kumar Pratihar |
Parametric study of R744-R717 cascade refrigeration system |
2015 |
Int. J. for Research in Emerging Science and Technology, Vol. 2, Issue-7, July, 2015, pp. 101-106, ISSN:2349-7610 |
| 39 |
Anil Kumar Pratihar |
Heat and mass transfer analysis of ammonia-water absorber of a compression-absorption system |
2015 |
Proceedings of the23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference IHMTC2015, December 17-20, 2015, Thiruvananthapuram, India |
| 40 |
Dr V K Singh |
Fabrication and study of mechanical properties of bamboo fibre reinforced bio-composites |
2015 |
40 |
| 41 |
Dr L Varshney |
Parametric investigation on thermo-hydraulic performance of wire screen matrix packed solar air heater |
2015 |
Verma, Prashant, and L. Varshney. "Parametric investigation on thermo-hydraulic performance of wire screen matrix packed solar air heater." Sustainable Energy Technologies and Assessments 10 (2015): 40-52. |
| 42 |
Dr Prashant Verma |
Prashant Verma and L. Varshney, Parametric investigation on thermo-hydraulic performance of wire screen matrix packed solar air heater, Int. J. Sustainable Energy Technologies and Assessments (Elsevier) 10, June 2015, 40-52. |
2015 |
Prashant Verma and L. Varshney, Parametric investigation on thermo-hydraulic performance of wire screen matrix packed solar air heater, Int. J. Sustainable Energy Technologies and Assessments (Elsevier) 10, June 2015, 40-52. |
| 43 |
Neeraj Bisht |
Influence of crack offset and crack tip distances on the interaction of multiple central parallel cracks in a rectangular plate |
2015 |
Neeraj Bisht, P C Gope, Influence of crack offset and crack tip distances on the interaction of multiple central parallel cracks in a rectangular plate, International Journal of Advance Research In Science And Engineering http://www.ijarse.com IJARSE, Vol. No.4, Special Issue (01), February 2015 |
| 44 |
Neeraj Bisht |
Mechanical properties of rice husk flour reinforced epoxy bio-composite |
2015 |
Neeraj Bisht, P C Gope, Mechanical properties of rice husk flour reinforced epoxy bio-composite, Int. Journal of Engineering Research and Applications, Vol. 5, Issue 6, ( Part -3) June 2015, pp.123-128 |
| 45 |
Neeraj Bisht |
Influence of crack offset distance on interaction of multiple collinear and offset edge cracks in a rectangular plate |
2014 |
Neeraj Bisht, P C Gope, V K Singh, Influence of crack offset distance on interaction of multiple collinear and offset edge cracks in a rectangular plate, Theoretical and Applied Fracture Mechanics, Volume 70, April 2014, Pages 19-29. |
| 46 |
Anil Kumar Pratihar |
Thermodynamic analysis of actual vapour compression system with R12 and its eco-friendly alternative refrigerants |
2014 |
Int. Journal of Research and Applications, Vol. 4, Issue 4 (Version7), April 2014, pp. 114-122, ISSN: 2248-9622 |
| 47 |
Neeraj Bisht |
Influence of crack offset distance on the interaction of multiple cracks on the same side in a rectangular plate |
2014 |
Neeraj Bisht, P C Gope, Kuldeep Panwar, Influence of crack offset distance on the interaction of multiple cracks on the same side in a rectangular plate, Frattura ed In tegrità Strutturale, 32 (2015) 1-12; DOI: 10.3221/IGF-ESIS.32.01 |
| 48 |
Dr Sakshi Chauhan |
Enhancement of Wettability of Aluminum Based Silicon Carbide Reinforced Particulate Metal Matrix Composite |
2014 |
Singh, V. K., Chauhan, S., Gope, P. C., & Chaudhary, A. K. (2015). Enhancement of Wettability of Aluminum Based Silicon Carbide Reinforced Particulate Metal Matrix Composite, High Temperature Materials and Processes, 34(2), 163-170. doi: https://doi.org/10.1515/htmp-2014-0043 |
| 49 |
Anil Kumar Pratihar |
Simple method for determination of extinction coefficient of wire screen matrices used in packed bed solar air heaters |
2013 |
22nd National and 11th ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013 |
| 50 |
Dr. Susheel Singh Bhandari |
1. S. S. Bhandari, K. Muralidhar, and Y. M. Joshi, Enhanced thermal transport through a soft glassy nano-disk paste. Physical Review E, Vol. 87, pp. 022301-6 (2013). (Impact factor-2.25) |
2013 |
S. S. Bhandari, K. Muralidhar, and Y. M. Joshi, Enhanced thermal transport through a soft glassy nano-disk paste. Physical Review E, Vol. 87, pp. 022301-6 (2013). (Impact factor-2.25) |
| 51 |
Dr. Susheel Singh Bhandari |
S. S. Bhandari, K. Muralidhar, and Y. M. Joshi, Thermal diffusivity and viscosity of suspensions of disk-shaped nanoparticles. Industrial and Engineering Chemistry Research, Vol. 52, pp. 15114-15123 (2013). (Impact factor-2.20) |
2013 |
S. S. Bhandari, K. Muralidhar, and Y. M. Joshi, Thermal diffusivity and viscosity of suspensions of disk-shaped nanoparticles. Industrial and Engineering Chemistry Research, Vol. 52, pp. 15114-15123 (2013). (Impact factor-2.20) |
| 52 |
Dr. Anadi Misra |
Checkerboard problem in finite element based topology optimization |
2013 |
Checkerboard problem in finite element based topology optimization A Shukla, A Misra, S Kumar International Journal of Advances in Engineering & Technology 6 (4), 1769 |
| 53 |
Dr V K Singh |
Water absorption and compressive properties of coconut shell particle reinforced-epoxy composite |
2013 |
42 |
| 54 |
Anil Kumar Pratihar |
Optimization of compression-absorption refrigeration system using differential evolution technique |
2013 |
Proceedings of International conference on Advanced Engineering Optimization Through Intelligent Techniques, July 01-03, 2013, Sardar Vallabhbhai NIT, Surat, India |
| 55 |
Dr V K Singh |
Evaluation of mechanical properties of bagasse-glass fiber reinforced composite |
2012 |
72 |
| 56 |
Anil Kumar Pratihar |
Performance evaluation of a small capacity compression-absorption refrigeration system |
2012 |
International Journal of Applied Thermal Engineering, Vol. 42, pp 41-48, 2012. doi:10.1016/j.applthermaleng.2012.03.011 |
| 57 |
Dr Sakshi Chauhan |
Mechanical behavior of banana fiber based hybrid bio composites |
2012 |
Singh, V.K., Gope, P.C., Sakshi, C. and Singh, B.D., 2012. Mechanical behavior of banana fiber based hybrid bio composites. J Mater Environ Sci, 3(1), pp.185-194. |
| 58 |
Dr. Susheel Singh Bhandari |
Asme conference |
2012 |
S. S. Bhandari, Y. M. Joshi and K. Muralidhar, Laser Interferometric determination of thermal diffusivity of transparent soft glassy materials, ASME 2012 Fluids Engineering Summer Meeting, Paper Number: FEDSM-72228, 8-12th July 2012, Rio Grande-Puerto Rico, USA. |
| 59 |
Dr V K Singh |
Mechanical behavior of banana fiber based hybrid bio composites |
2012 |
47 |
| 60 |
Dr. Susheel Singh Bhandari |
A. Nigam, M. Maheswari, S. S. Bhandari and P. K. Panigrahi, Improved holographic reconstruction procedure for particle field and biological cell characterization. Proc. International conference on light, Optics’11 held at NIT Calicut, pp. OPD-6: 245-247, 23-25th May 2011. |
2011 |
A. Nigam, M. Maheswari, S. S. Bhandari and P. K. Panigrahi, Improved holographic reconstruction procedure for particle field and biological cell characterization. Proc. International conference on light, Optics’11 held at NIT Calicut, pp. OPD-6: 245-247, 23-25th May 2011. |
| 61 |
Dr V K Singh |
Silica-styrene-butadiene rubber filled hybrid composites: experimental characterization and modeling |
2010 |
55 |
| 62 |
Anil Kumar Pratihar |
Simulation of an ammonia-water compression-absorption refrigeration system for water chilling application |
2010 |
International Journal of Refrigeration, Vol. 33(7), pp 1386-1394, 2010. doi:10.1016/j.ijrefrig.2010.05.011 |
| 63 |
Anil Kumar Pratihar |
Compression-absorption system operating on natural working fluids |
2009 |
International Conference on Emerging Technologies in Air-conditioning and Refrigeration (organized by ISHRAE/ASHRAE), Feb. 20-21, 2009, New Delhi |
| 64 |
Anil Kumar Pratihar |
Future scenario of refrigeration and air conditioning industry |
2009 |
National Conference on Recent Advances in Mechanical & Production Engineering, Feb. 12-14, 2009, Pantnagar, India |
| 65 |
Anil Kumar Pratihar |
Compression-absorption refrigeration; a step towards energy efficiency and environment protection |
2009 |
International Conference on Energy Engineering-2009, Jan. 7-9, 2009, Pudducherry, India. |
| 66 |
Anil Kumar Pratihar |
Parametric studies on ammonia-water compression-absorption refrigeration system |
2008 |
International Conference, 8th IIR Gustav Lorentzen Conference on Natural Working Fluids, Sept. 7-10, 2008, Copenhagen, Denmark. |
| 67 |
Dr Prashant Verma |
Prashant Verma, Varun and S.K. Singal, Review of mathematical modeling on latent heat thermal energy storage system using phase change materials, Int. J. Renewable and Sustainable Energy Reviews (Elsevier), 12 (4), May 2008, 999-1031 |
2008 |
Prashant Verma, Varun and S.K. Singal, Review of mathematical modeling on latent heat thermal energy storage system using phase change materials, Int. J. Renewable and Sustainable Energy Reviews (Elsevier), 12 (4), May 2008, 999-1031 |
| 68 |
Dr L Varshney |
Optimal thermohydraulic performance of a wire mesh packed solar air heater |
2006 |
Mittal, M. K., and L. Varshney. "Optimal thermohydraulic performance of a wire mesh packed solar air heater." Solar Energy 80.9 (2006): 1112-1120. |
| 69 |
Anil Kumar Pratihar |
Optimization of absorber using Differential Evolution: An Evolutionary Optimization Techniqu |
2005 |
14th ISME International Conference on Mech. Engg. in Knowledge Age, Dec. 12-14, 2005, Delhi, pp 656-661. |
| 70 |
Dr L Varshney |
Design on Simple and Reliable Experiments for Precooling Studies |
2003 |
Varshney, L. and Ansari F.A., Design on Simple and Reliable Experiments for Precooling Studies, J. Food Sci. Technol. Vol. 40, No. 2, 183-186, 2003. |
| 71 |
Anil Kumar Pratihar |
Simulation of Absorber and Desorber of a Compression-Absorption System |
2003 |
International Conference on Emerging Technologies in Air-conditioning and Refrigeration, organized by ISHRAE/ASHRAE |
| 72 |
Anil Kumar Pratihar |
Thermodynamic Modeling and Feasibility Analysis of Compression-absorption System |
2001 |
International Conference on Emerging Technologies in Air Conditioning and Refrigeration (organized by ISHRAE/ASHRAE), New Delhi, pp 207-215 |
| 73 |
Dr L Varshney |
Heat Transfer and Friction Factor Correlations for Rectangular Solar Air Heater Duct Packed with Wire Mesh Screen Matricse |
1998 |
Varshney L. and Saini J.S., Heat Transfer and Friction Factor Correlations for Rectangular Solar Air Heater Duct Packed with Wire Mesh Screen Matricse, Int. J. of Solar Energy, Vol. 62, No.4, pp. 255-262,1998 |
| 74 |
Anil Kumar Pratihar |
Evaluation of Top loss Coefficient of Flat Plate Collectors |
1997 |
XIIth Convention of Mechanical Engineers, Institution of Engineers (I), Allahabad |
| 75 |
Anil Kumar Pratihar |
Experimental Study of Loss Coefficient of a Flat Plate Collector |
1997 |
International Conference on Advances in Mechanical & Industrial Engineering, pp 409-415, University of Roorkee, Roorkee |
| 76 |
Anil Kumar Pratihar |
Overall Loss Coefficient of Flat Plate Collectors-A Review |
1996 |
Xth ISME Conference, pp III 91-97, New Delhi |
| 77 |
Anil Kumar Pratihar |
Performance Evaluation and Economic Optimization of solar Heating System for Shillong |
1990 |
Journal of Institution of Engineers (India), Vol. 71, pp 42-47. |