Dr. Arun Kumar Chaudhary
Department : Industrial and Production Engineering
Email-id: aruncdme@gmail.com
Qualification:
Designation: Associate Professor
Research Interests:

Publications:
1.  Deepak Verma, Deepak GUPTA, Mohammad Jawaid, Arun Kumar Chaudhary, Nangan Senthilkumar, Siddharth Jain, Hiroshi Uyama, Manunya Okhawilai, Integration of cellulosic bhimal/nettle fibers and nanofillers into epoxy based composites: Mechanical, thermal and morphological evaluation with Weibull statistical analysis, International Journal of Biological Macromolecules, 2025, 149824, 10.1016/j.ijbiomac.2025.149824

2.  Gupta, D., Chaudhary, A. K., Singh, W., Suryavanshi, A., Attwal, K. P., Misra, V., & Kumar, D. (2025). Behavioral Insights and IoB in Advancing Biocomposite Technologies: A Management Perspective. In G. Chhabra, T. Singh, & M. Kumar (Eds.), Mapping Human Data and Behavior With the Internet of Behavior (IoB) (pp. 123-162). IGI Global Scientific Publishing. https://doi.org/10.4018/979-8-3693-7545-7.ch006

3.  Gupta, D., Arora, D., Chaudhary, A. K., Singh, W., Suryavanshi, A., Attwal, K. P., Kumar, D., & Misra, V. (2025). Integrating IoB in Sustainable Supply Chain Management of Composites for Enhancing Efficiency and Reducing Waste. In G. Chhabra, T. Singh, & M. Kumar (Eds.), Mapping Human Data and Behavior With the Internet of Behavior (IoB) (pp. 301-336). IGI Global Scientific Publishing. https://doi.org/10.4018/979-8-3693-7545-7.ch012

4.  Gupta, D., Agarwal, D., Chaudhary, A. K., Singh, W., Suryavanshi, A., Attwal, K. P., Kumar, D., & Shukla, A. (2025). Managing Ethical and Regulatory Challenges in Insights From IoB Applications. In G. Chhabra, T. Singh, & M. Kumar (Eds.), Mapping Human Data and Behavior With the Internet of Behavior (IoB) (pp. 497-524). IGI Global Scientific Publishing. https://doi.org/10.4018/979-8-3693-7545-7.ch016

5.  Gupta, D., Chaudhary, A. K., Verma, D., Singh, W., Nangan, S., Thanigaivel, S., … Lackner, M. (2025). AHP-TOPSIS-based analysis for the wettability of agro-industrial waste particulates Bhimal fiber-reinforced epoxy bio-composites in different oil water environments. Green Chemistry Letters and Reviews, 18(1). https://doi.org/10.1080/17518253.2025.2461243

6.  Deepak Gupta, Arun Kumar Chaudhary, Dipesh Kumar Mishra, Alka Verma, Warshi Singh, Kanwal Preet Singh Attwal, Novel Applications of Functionally Graded Materials, https://doi.org/10.1201/9781003656333

7.  Gupta, D., Chaudhary, A.K., Mandal, A.K., Mishra, D.K., VikasMisra, Saxena, M. (2025). Investigation for Collective Impact of Physio-Thermo-Mechanical and Geometrical Parameters Interaction in Additive Manufacturing: Review. In: Katiyar, J.K., Sharma, A., Pham, D.T., Gupta, T.V.K. (eds) Advanced Materials and Manufacturing. ICEMSMCI 2024. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-96-8167-9_15

8.  Himanshu Krishna, Maneesh Tewari, Deepak Gupta, Sandeep Kumar, Arun Chaudhary, Ajay Suryavanshi; Parametric optimization of resistance spot welding process during joining of low alloy steels. AIP Conf. Proc. 28 October 2025; 3297 (1): 050014. https://doi.org/10.1063/5.0287017

9.  Sandeep Kumar, Argha Saha, Tanmay Tiwari, Chandra Sekhar Rakurty, Deepak Kumar, Arun Kumar Chaudhary, Maneesh Tewari, 2025, 2025/12/13, Machine learning-driven empirical modeling and optimization in rotary tool micro-ultrasonic machining, The International Journal of Advanced Manufacturing Technology, 1433-3015, https://doi.org/10.1007/s00170-025-17121-2

10.  Deepak Verma, Deepak Gupta, Sarawut Rimdusit, Mohammad Jawaid, Arun Kumar Chaudhary, Manunya Okhawilai, (2025). Opportunities and challenges of Grewia optiva (Bhimal) fiber as a sustainable resource for polymer bio-composites. Journal of Reinforced Plastics and Composites. 2025;0(0). doi:10.1177/07316844251397001

11.  Deepak Gupta, Vaishally Dogra, Deepak Verma, Arun Kumar Chaudhary, Maneesh Tewari, Chapter 05, Processing of PLA/PLLA-based composites for medical device applications, Editors: Deepak Verma, Manunya Okhawilai, Kheng-Lim Goh, Seeram Ramakrishna, Pooria Pasbakhsh, Mohit Sharma in Bioresorbable Polymers and their Composites: Characterization and Fundamental Processing for Pharmaceutical and Medical Device Development. 2023. ISBN: 9780443189166. https://doi.org/10.1016/B978-0-443-18915-9.00013-6

12.  Ravi Butola, Kapil Dev Pandey, Qasim Murtaza, Ravinderjit Singh Walia, Mohit Tyagi, Krovvidi Srinivas, Arun Kumar Chaudhary. Experimental analysis and optimization of process parameters using response surface methodology of surface nanocomposites fabricated by friction stir processing. Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems. 2023;0(0). doi:10.1177/23977914231151485 (I.F. 6)

13.  Agrawal, Pawan; Sharma, Pragya; Verma, Akarsh; Singh, V.; Chaudhary, Arun; Chauhan, Sakshi, Impact of Graphite Particle Surface Modification on the Strengthening of Cross-Linked Polyvinyl Alcohol Composites: A Comprehensive Investigation. Proc IMechE Part L: J Materials: Design and Applications.DOI: 10.1177/14644207231188601 (I.F. 2.4)

14.  Deepak Gupta, Arun Kumar Chaudhary, Vinay Kumar Singh, Deepak Verma, Kheng Lim Goh, Mohit Sharma,Thermo-mechanical analysis of bhimal fiber (Grewia optiva)-CaCO3/flyash/TiO2 reinforced epoxy bio-composites, Industrial Crops and Products, Volume 204, Part B, 2023, 117341, ISSN 0926-6690, https://doi.org/10.1016/j.indcrop.2023.117341 (I.F. 5.9 )

15.  Deepak Gupta, Vaishally Dogra, Deepak Verma, Arun Kumar Chaudhary, Maneesh Tewari, Chapter 04, PCL-based composites and their utilizations in the medical sector, Editors: Deepak Verma, Manunya Okhawilai, Kheng-Lim Goh, Seeram Ramakrishna, Pooria Pasbakhsh, Mohit Sharma in Bioresorbable Polymers and their Composites: Characterization and Fundamental Processing for Pharmaceutical and Medical Device Development. 2023. ISBN: 9780443189166. Woodhead Publishing (Elsevier)

16.  Deepak Gupta, Vaishally Dogra, Deepak Verma, Arun Kumar Chaudhary, Maneesh Tewari, Chapter 05, Bioresorbable polymers/HNT blend composite wound dressings, Editors: Deepak Verma, Manunya Okhawilai, Kheng-Lim Goh, Seeram Ramakrishna, Pooria Pasbakhsh, Mohit Sharma in Bioresorbable Polymers and their Composites: Characterization and Fundamental Processing for Pharmaceutical and Medical Device Development. 2023. ISBN: 9780443189166. Woodhead Publishing (Elsevier)

17.  Kumar, Sundeep & Gupta, Deepak & Sharma, Vikas & Chaudhary, Arun & Meena, M.L. & Ajay,. (2023). Recent development in natural fiber composites, testing and fabrication methods: A review. Materials Today: Proceedings. 10.1016/j.matpr.2023.02.073

18.  Deepak Verma, Yu Dong, Mohit Sharma & Arun Kumar Chaudhary (2022) Advanced processing of 3D printed biocomposite materials using artificial intelligence, Materials and Manufacturing Processes, 37:5, 518-538, DOI: 10.1080/10426914.2021.1945090

19.  Deepak Verma, Vaishally Dogra, Arun Kumar Chaudhary, Ravikant Mordia, 5 - Advanced biopolymer-based composites: construction and structural applications, Editor(s): Deepak Verma, Mohit Sharma, Kheng Lim Goh, Siddharth Jain, Himani Sharma, In Woodhead Publishing Series in Composites Science and Engineering, Sustainable Biopolymer Composites, Woodhead Publishing, 2022, Pages 113-128, ISBN 9780128222911, https://doi.org/10.1016/B978-0-12-822291-1.00010-5

20.  Vikas Sharma, M L Meena, A K Chaudhary, and Sundeep Kumar, Optimization of Abrasive Wear Behaviour of Cenosphere Filled Basalt-Epoxy Composites Using Taguchi Approach, IOP Conf. Ser.: Mater. Sci. Eng. Volume 1017, 2021, Pages 1-10, doi:10.1088/1757-899X/1017/1/012014

21.  Vandana Jain, Anand K. Mandal, Arun K. Chaudhary, Arvind Patidar, Fabrication of Three-Dimensional Geometry on Two Dimensional Abrasive Water Jet Machine, Materials Today: Proceedings, Volume 44, Part 1, 2021, Pages 1975-1978, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.12.108

22.  Anand Kumar Mandal, Arun Kumar Chaudhary, Vandana Jain, M.L.Meena, Jambeshwar Sahu , R.S Jadoun, The Effect of Elastic Modulus of Adhesive on Stress-Distribution in Weld bonded Joint of Al 6082-T6 sheets, Materials Today: Proceedings, Volume 44, Part 1, 2021, Pages 1999-2004, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.12.119

23.  Vikas sharma, Makkhan Lal Meena, Arun Kumar Chaudhary and Mukesh Kumar, Cenosphere Powder Filled Basalt Fiber Reinforced Epoxy Composite: Physical, Mechanical, and Thermal Conductivity Analysis, Materials Today: Proceedings, Volume 44, Part 6, 2021, Pages 4984-4989, ISSN 2214-7853, doi.org/10.1016/j.matpr.2020.12.938

24.  Sandeep Kumar, Akshay Dvivedi, Ajay Suryavanshi, Arun Kumar Chaudhary, Maneesh Tewari, Investigations and Optimization of Rotary Tool Micro-USM Process for Fabrication of Microchannels, Materials Today: Proceedings, 2021, ISSN 2214-7853, doi.org/10.1016/j.matpr.2021.01.423

25.  N Sah, D Kamalraj, A Goel, AK Chaudhary, Effect of blend proportion on properties of thermal bonded chicken-jute fiber nonwovens. Man-Made Textiles in India Vol. 49, Issue 12, Pages 410-414, 2021, ISSN: 3777537

26.  Arvind Patidar, Anand Kumar Mandal, Arun Kumar Chaudhary, High Speed Super Abrasive Grinding of Sintered Yttria Stabilised Zirconia (YSZ) Using Single Layer Electroplated Diamond Grinding Wheels, Materials Today: Proceedings, Volume 45, Part 6, 2021, Pages 4660-4665, ISSN 2214-7853, doi.org/10.1016/j.matpr.2021.01.111

27.  Arvind Patidar, Anand Kumar Mandal, Arun Kumar Chaudhary, Vandana Jain, Surface roughness of Sintered Yttria Stabilised Zirconia (YSZ) Using High Speed Moderate Depth Super-Abrasive Grinding, Materials Today: Proceedings, Volume 44, Part 1, 2021, Pages 2705-2709, ISSN 2214-7853, doi.org/10.1016/j.matpr.2020.12.686

28.  Arun Kumar Chaudhary, PC Gope, Anand Kumar Mandal, Vandana Jain, Arvind Patidar, Effect of Feed Rate and Cutting Speed on Cutting Forces Developed During Machining of Epoxy Based Almond Shell (Prunus amygdalus L.) - Coconut Fiber (Cocos nucifera) Particle Reinforced Biocomposites, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.12.081

29.  Arun Kumar Chaudhary, Alaknanda Ashok, Indrajeet Kumar, “A System For Forecasting Solar Irradiance For A Solar-Based Photovoltaic System And Method Thereof”, IN Patent App. 202,011,044,299

30.  Neha Sah, Alka Goel, Arun Kumar Chaudhary, Alka Verma, Thermal analysis of chicken fiber augmented epoxy composites, Materials Today: Proceedings, 2020, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.10.580

31.  Anand Kumar Mandal, M.L. Meena, Arun Kumar Chaudhary, Arvind Patidar, B.L. Gupta, Comparative analysis of resistance spot welded and weld bonded joint of al 6082-T651, Materials Today: Proceedings, 2020, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.10.446

32.  V. K. Singh, Sakshi Chauhan, P. C. Gope & A. K. Chaudhary, “Enhancement of wettability of aluminum based silicon carbide reinforced particulate metal matrix composite” High Temperature Materials and Processes. 34 (2), 163-170, ISSN (Online) 2191-0324, ISSN (Print) 0334-6455, DOI: 10.1515/htmp-2014-0043, June 2014. (I.F. 0.826)

33.  Arun Kumar Chaudhary, P.C. Gope, V.K. Singh, Water absorption and thickness swelling behaviour of almond (Prunus amygdalus L.) shell particles and coconut (Cocos nucifera) fiber hybrid epoxy based biocomposite, Science and Engineering of Composite Materials. Volume 22, Issue 4, Pages 375-382, ISSN (Online) 2191-0359, ISSN (Print) 0792-1233, DOI: 10.1515/secm-2013-0317

34.  Arun K. Chaudhary, P. C. Gope and V. K. Singh," Effect of Almond Shell Particles on Tensile Property of Particleboard", Journal Materials & Environment science 4 (1) (2013) 109-112.

35.  V. K. Singh, Jayant Singh and Arun K. Chaudhary, “Fabrication of Light Weight Farms Yoke With The Use of Composite Material”, Agric Eng Int: CIGR Journal, 14(4) (2012) 80-85. ISSN 1682-1130

36.  R. K. Bhagat, V. K. Singh, P. C. Gope, A.K. Chaudhary, “Evaluation of stress intensity factor of multipleinclined cracks under biaxial loading”, Frattura ed Integrità Strutturale, 22 (2012) 5-11; DOI: 10.3221/IGF-ESIS.22.01. ISSN 1971-8993

37.  Maneesh Tewari, V. K. Singh, P. C. Gope and Arun K. Chaudhary, Evaluation and Testing of Mechanical Properties of Bagasse-Glass Fiber Reinforced Composite, Journal Materials & Environment science (ISSN: 2028-2508) 3 (1) (2012) 171-184.

38.  Chaudhary A.K., Gope P.C., Singh V.K. (2011) Studies on Fracture Performance of Bio-fiber-Silica-glass Fiber Reinforced Epoxy Hybrid Composites. In: Proulx T. (eds) Experimental and Applied Mechanics, Volume 6. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York, NY, Springer, New York, NY

39.  Tewari M., Singh V.K., Chaudhary A.K., Proulx T. (eds) Experimental and Applied Mechanics, Volume 6. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York


FDP Attended:
1.  ICAR - NAARM Massive Open Online Course on Designing E-Learning Content

2.  Digital Transformation In Teaching Learning Process

3.  Newer Machining Methods


FDP Organised:

Projects:
1. Project Title: Optimizing Electrode Design for Resistance Spot Welding of coated steel sheets
Starting Date: 2019-05-25
Duration: 31 Months
Status: Completed